XMODS custom RC Starter Kit

XMODS offers you the ultimate control radio racing experience. Street Smart looks like missing the accuracy of the performance in your own car, just please be adjusted according to you. Starter kit includes the following features ...
1) align the round of is equal to the side with the flat side of the axle and the displacement of the wheel on the same axle.
2 Bolts ) of the matrix on the axle and tighten with the specified key.
3) repeat steps 1 and 2 for each round, the installation of the battery in the chassis
1) check whether the power switch on the underside of the chassis the position is off (back).
2) Unsnap battery compartment cover on the left and right sides.
3) instead of two Aaa alkaline or rechargeable battery on the left and right of the Chamber, according to the polarity symbols (+ and-) marked on the inside.
4) snap the battery cover back into place. Assembly of car body
1) Align the front fender behind the front end, and insert and tighten the two screws tightly.
2) Align on the front of the hood, and insert the four screws from the bottom and just tighten.
3) Align the rear spoiler on the trunk, and insert the two screws from below the body and immediately tighten.
4) Align the rear bumper of the under the rear and Insert and just screws.
5) into the left side of the mirror to the driver's window, and then insert one screw from under his body and just tighten. For the mirror to the right.
6) Align the left hand side skirt under the body and Insert and tighten the two screws. Repeat for the right side skirts

Download