Automatic transmission is the combination of 3prvek torque converter and triple shaft electronically controlled automatic transmission, which provides 4 speed forward and reverse 1 speed. The whole unit is located in accordance enginewith. Torque CONVERTER, gear and clutch, torque converter consists of a pump, turbine and stator, combined in a whole. Are connected to the engine crankshaft that together as a whole as the motor rotates. Around the outside of the torque converter to the device, which is the ring of the grid with the pinion, starter, when the engine. The torque Converter Assembly is used as a flywheel to transfer energy to the mainshaft. The transmission has three parallel shafts, the mainshaft, countershaft and auxiliary shaft. Mainshaft is in accordance with the crankshaft of the engine. Mainshaft includes gear for the third and couplings for 1. and 4. 4. reverse, and 1 (3. equipment is integral to the mainshaft, while the reverse is an integral part of the 4. device). Countershaft includes 3. clutches and gears 2., 3. and 4, reversing a 1. The secondary shaft includes 2 pin, secondary drive device and other equipment. 4. reverse can be locked
Friday, August 26, 2011
Technical information about the ACURA INTEGRA 1990
Posted by
stephen
,
at
12:23 AM
thx for reading Technical information about the ACURA INTEGRA 1990
You can share this post by copying this url "https://manualcollection.blogspot.com/2011/08/technical-information-about-acura.html" and paste on ypur blogs, or social Media.