The first chapter of this manual is intended to give you important information about hardware requirements, installation and user interface. Chapters 2 to 5 include four complete tutorials, which give you detailed step-by-step instructions describing the entire process of creating NC (Numerical Control) programs. The last chapter contains a brief overview of our EZ-DNC communications utility. This tutorial is intended for users with little, or no experience in EZ-Mill operations. The step-by-step instructions describe the complete process of creating the NC program for the 2D part shown in Picture 2-1, focusing on the machining process and also describing more advanced techniques used for roughing, finishing and Work Step handling using the integrated spreadsheet. In addition we show you how to import CAD data by loading and arranging a DXF file.
Table of Content :
CHAPTER 1. INTRODUCTION AND SETUP
CHAPTER 2. EZ-MILL 2D TUTORIAL
CHAPTER 3. EZ-MILL 3D TUTORIAL
CHAPTER 4. EZ-TURN TUTORIAL
CHAPTER 5. EZ-TURN / TURNMILL TUTORIAL
CHAPTER 6. COMMUNICATION WITH THE CONTROL
